DRE Veterinary is now Avante Animal Health

Visit our new website by using the "Proceed to new URL" button.

Datex Ohmeda S/5 Monitor

Ask About Financing

Available in US only.

Need Equipment Advice?

Ask Our Experts! (800) 979-6795



Central Unit and Displays

  • User configurable display layout and colors
  • Support for up to 8 waveforms on screen
  • Support for user configurable second and third screen with different waveform and numerical information
  • Anesthesia dedicated alarm system
  • Alarms display and adjustment page
  • 10-minute graphical mini trends referenced to set alarm limits
  • Automatic alarm limits function
  • Six user configurable modes and special cardiac bypass mode
  • 24 hour numerical and graphical trends
  • Split screen capability to show ST, spirometry loop, EEG, EP or mini trends permanently
  • Four user-configurable graphical trend pages
  • Trend cursor in both graphical and numerical trends
  • Waveform snapshots to store and recall waveform samples
  • Help function
  • On-line help for menu functions
  • Open software and hardware architecture
  • Easy insertion/removal of plug-in parameter modules without interrupting other monitoring
  • Anesthesia care oriented user interface
  • Optional extended arrhythmia analysis
  • Connector for Datex-Ohmeda S/5™ Device Interfacing Solution

S/5™ ComBar

  • Anesthesia specific command bar for intuitive access to the monitoring functions
  • Removable command bar brings monitor controls close to the user

S/5™ Extension Frame

  • Frame with 4 additional module slots
  • Moves patient cables close to the patient
  • Single cable connects the Extension Frame to the s/5 anesthesia Monitor's Central Unit
  • Reduces patient cable clutter
  • Mounts to any vertical or horizontal pole

S/5™ Remote Controller

  • Remote Controller for intuitive monitor operation
  • ComWheel™ and 12 keys, direction function keys for most common functions



  • Display size: 12.1 in diagonal.
  • Display type: Active matrix color TFT LCD.
  • Display resolution:SVGA resolution, 800 x 600.
  • Number of traces:up to 8.
  • Display layout and colors:User-configurable.Integrated Command Board with direct function keys, menu keys and ComWheel for selections and adjustments in menus.


  • Module capacity: 2+2 module slots.
  • I/O connections: RS-232 computer serial output.2 analog outputs.External keyboard connector.
  • Network option:Compatible with Datex-Ohmeda Network for monitor-to-monitor communication and centralized viewing.
  • Network and MemCard option:Activates MemCards to transfer the trended data of patient vital signs.
  • Printing:Laser printing capabilities with serial printer supporting PCL5 language (Network and serial/parallel converter).
  • Recorder option:Built-in three-channel thermal array recorder.
  • Mounting options:Bed mount, wall mount and roll stand.


  • Size:13.2 in W x 8.1 in D x 13.4 in H (335 x 205 x 340 mm).
  • Weight (without modules):24.2 lbs (11 kg)

Power Supply

  • Rated voltage range and frequencies:100 to 240v 10%, 50/60 Hz.
  • Maximum power consumption:140 VA.
  • Protection class:Class I.
  • Grounding:Hospital grade.


  • Type:Built-in NiMH battery (2 pcs).
  • Capacity:Up to 1.5 h typical on full charge at 23C.
  • Recharging:When connected to mains power.
  • Charging time:10 hours to full capacity.
  • Battery operation alarm.
  • Indicator:Battery bar displayed on the screen.


  • Graphical:All parameters, selectable times: 30 min to 72 h.
  • Numerical:Continuously measured parameters sampled every 5 minutes, NIBP and PCWP values updated after each measurement.Also marker triggers numerical trend updating.
  • Trend cursor:In both graphical and numerical trends.


  • Alarm system classified into three categories according to priority in critical care; color and audio tone coded.Central alarms display and adjustment page.10 min graphical mini trends referenced to set alarm limits


Documents & Resources