DRE Waveline Pro

Physical Dimensions & Weight:

• Base Unit: 12.1”/309 mm (H) x 14.4”/365 mm (W) x 6.3”/159 mm (D)
• Weight: 17.6 lbs/8.0 kgs (including anesthetic agents module and batteries)

Application:

• Small, Medium, and Large animal

Performance Specifications:

• Display: 15” color TFT, Resolution 1024 x 768
• Trace: 8 waveforms
• Indicators:
  Alarm indicator
  Power indicator
  QRS beep and alarm sound
• Trend time: 1 – 48 hours
• Recorder:
  Built-in, thermal array, 2 channels
  Record width: 1.9”/48 mm
  Recorder paper: 2”/50 mm
  Record speed: 25 mm/s, 50 mm/s

ECG:

• Input: 5-lead ECG cable and standard AAMI line for connection
• Lead Choice: I, II, III, aVR, aVF, aVL, V, TEST
• Gain Choice : x0.5, x1, x2, x4
• Frequency Characteristic: 0.05 ~ 35 HZ (+3dB)
• ECG Waveforms: 7 channels
• Penetration Voltage: 4000VAC 50/60Hz
• Sweep Speed: 12.5, 25 and 50 mm/s
• HR Display Range: 30 – 300bpm
• Accuracy: ±1 bpm or ±1%, whichever is greater
• Alarm Limit Range Setting: Upper limit 100 – 200 bpm; Lower limit 30 – 100 bpm

RESP:

• Measure Method: RA-LL impedance
• Range: 0 – 120 rpm
• Accuracy: ±3 rpm
• Alarm Limit Setting: Upper limit 6 – 120 rpm: Lower limit 3 – 120 rpm
• Sweep Speed: 12.5 and 25 mm/s

TEMP:

• Range: 25° – 50° (C)
• Accuracy:
  ± 0.2° C (25.0° – 34.9° C)
  ± 0.1° C (35.0° – 39.9° C)
  ± 0.2° C (40.0° – 44.9° C)
  ± 0.3° C (45.0° – 50.0° C)
• Display Resolution: 0.1° C
• Alarm Limit Setting: Upper limit 0° – 50° C, lower limit 0° – 50° C
• Channel: 2 channels

SpO2: (Nellcor)

• ASpO2: Anti-motion SpO2
• SpO2% Range: 0 – 100%
• SpO2 Accuracy: ±2% (70 – 100%, non-motion) ±3% (70 – 100%, motion)
• Pulse Rate Range: 30 – 250 bpm
• Pulse Rate Accuracy: ±2 bpm (non-motion) ±3 bpm (motion)
• Alarm Limit Setting: Upper limit 70 – 100%, lower limit 70 – 100%
• SpO2 Probe Y-site:
  Red light LED wavelength – 660nm±5nm
  Infrared light LED wavelength – 940nm±10nm

NIBP:

• Measuring Technology: Automatic oscillating measurement
• Cuff Inflating: <30s (0 – 300 mmHg, standard adult cuff)
• Measuring Period: AVE<40s
• Mode: Manual, Auto
• Measuring Interval in AUTO Mode: 2 min – 4 hrs
• Pulse Rate Range: 30 – 250 (bpm)
• Measuring Range:
  Adult/Pediatric Mode
  - SYS: 40 – 250 (mmHg) DIA :15 – 200 (mmHg)
  Neonatal Mode
  - SYS: 40 – 135 (mmHg) DIA : 15 – 100 (mmHg)
• Resolution: 1mmHg
• Accuracy:
  Maximum Mean error: ±5mmHg
  Maximum Standard deviation: 8mmHg
• Overpressure Protection:
  Adult Mode: 300(mmHg)
  Neonatal Mode: 160 (mmHg)
• Alarm Limit Setting:
  - SYS: 50 – 240 mmHg
  - DIA: 15 – 180 mmHg

IBP:

• Measurement Range: -50 – 300mmHg
• Channel: 2 channels
• Pressure Transducer: Sensitivity, 5μV/V/mmHg
• Impedance Range: 300 – 3000Ω
• Transducer Sites: ART, PA,CVP, RAP, LAP, ICP
• Unit: mmHg/kPa selectable
• Resolution: 1 mmHg
• Accuracy: ±1 mmHg or ±2%, whichever is greater
• Alarm Range: -10 – 300 mmHg

EtCO2 (Respironics) (mainstream or sidestream):

• CO2 Measurement Range: 0 – 99 mmHg
• Accuracy:
  ±2 mmHg (0 – 38 mmHg)
  39-99 mmHg ±5% of reading + 0.08% for every 1 mmHg (above 38 mmHg)
• Sampling Rate: 50 ml/min
• Initialization Time: 30 seconds (typical), reaches ±5% steady-state accuracy within 3 minutes
• Respiration Rate: 0 – 150 breaths/min
• Mode: Adult, neonate

Anesthetic Agents:

• Method: Infrared absorption
• Gas Sorts: Halothane, Isoflurane, Enflurane, Sevoflurane, Desflurane, CO2, N2O, O2 (optional Automatic Agent ID)
• Measurement Range:
  Halothane, Isoflurane: 0 – 8.5%
  Enflurane, Sevoflurane: 0 – 10%
  Desflurane: 0 – 20%
  CO2: 0 – 10%
  N2O: 0 – 100% 
• Bias:
  Halothane, Isoflurane, Enflurane, Sevoflurane, Desflurane: ±(0.15 Vol% + 15% rel.)
  CO2: ±(0.5 Vol% + 12% rel.)
  N2O: ± (2 Vol% + 8% rel.)

Networking:

• Industry standard 802.11b/g wireless network

Power:

• Source: External AC power or internal battery
• AC Power: 100 – 240VAC, 50/60Hz, 150VA
• Battery: Built-in and rechargeable
• Charge Time: 4 hours

Environmental Specifications:

• Temperature:
  Operating: 5° – 40° C
  Storage: -20° – 65° C
• Humidity range:
  Operating: ≤80 %
  Storage: ≤80 %